| Spot Free Rinse Systems |
No equipment room, no problem! The PurClean Xtreme Environment System has been engineered to withstand the harsh environment of a wash bay. The uniquely designed Xtreme Environment system with its attractive fiberglass cover and stainless steel frame provides the necessary protection required when an in-bay installation is your only available option.
Contact us about your spot free rinse
system needs!
|
| |
| PC 3000 Xtreme Environment |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR
110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220 VOLT 20 AMP SINGLE PHASE CIRCULT WITH ITS OWN L6-20 LOCKING RECEPTICAL. PUT THE PULG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 2.1 GPM
REJECT
REJECT - 2.3 GPM
RO MOTOR
1-1/2 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
10.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
500 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 4500 Xtreme Environment |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METERS
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220 VOLT 20 AMP SINGLE PHASE CIRCULT WITH ITS OWN L6-20 LOCKING RECEPTICAL. PUT THE PULG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 3.1 GPM
REJECT
REJECT- 2.3 GPM
RO MOTOR
1-1/2 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
10.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
500 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 1000 WALL MOUNT |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
AUTO BACK FLUSHING CARBON HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME (BLUE OR WHITE)
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
OPTIONAL STAND MOUNT |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 0.7 GPM
REJECT
0.9 GPM
RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 HP MOTOR)
RO MOTOR AMPS
9
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 36" TALL X 12" DEEP
NET WEIGHT
350 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO)
|
| |
| PC 2000 WALL MOUNT |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
AUTO BACK FLUSHING CARBON HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME (BLUE OR WHITE)
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
OPTIONAL STAND MOUNT |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 1.4 GPM
REJECT
1.6 GPM
RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 HP MOTOR)
RO MOTOR AMPS
9
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
350 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO |
| |
| PC 3000 WALL MOUNT |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
AUTO BACK FLUSHING CARBON HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME (BLUE OR WHITE)
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
OPTIONAL STAND MOUNT |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 2.1 GPM
REJECT
2.3 GPM
RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 1/2 HP WITH A RATING OF 10.5 AMPS)
RO MOTOR AMPS
9
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
500 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 4500 WALL MOUNT |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 2.8 GPM
REJECT
2.3 GPM
RO MOTOR
1 1/2 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
10.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
500 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 4500 STAND MOUNT |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 30 GPM AT 40 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 2.8 GPM
REJECT
2.3 GPM
RO MOTOR
1-1/2 HP FLINT & WALLING BOOSTER PUMP WITH A RATING OF 10.5 AMPS
RO MOTOR AMPS
13.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 77" TALL X 24" DEEP
NET WEIGHT
700 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 6000 STAND MOUNT |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER) INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 30 GPM AT 40 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 4.2 GPM
REJECT
2.1 GPM PER BANK - TOTAL 4.2 GPM
RO MOTOR
3 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
13.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 77" TALL X 24" DEEP
NET WEIGHT
700 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 8000 STAND MOUNT |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1-1/4" WATER LINE W/FPT BALL VALVES, 30 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 5.6 GPM
REJECT
2.1 GPM OUT OF EACH REJECT FLOW METER FOR A TOTAL OF 4.2 GPM
RO MOTOR
3 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
13.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
36" WIDTH X 92" TALL X 24" DEEP
NET WEIGHT
900 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 10,000 STAND MOUNT |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1-1/4" WATER LINE W/FPT BALL VALVES, 30 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
TWO 220 VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 7 GPM
REJECT
2.1 GPM OUT OF EACH REJECT FLOW METER FOR A TOTAL OF 4.2 GPM
RO MOTOR
3 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
13.5
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
36" WIDTH X 92" TALL X 24" DEEP
NET WEIGHT
900 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 15,000 STAND MOUNT |
| |
 |
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
CARBON TANK W/ AUTO BACK FLUSHING HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
COLORS BLUE AND WHITE |
WATER REQUIREMENTS
TWO 1-1/2" WATER LINE W/FPT BALL VALVES, 40 GPM AT 40 PSIG. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 208/230 or 460/480 VOLT 20 AMP THREE PHASE CIRCUIT. PUT THE CIRCULT 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 10.4 GPM
REJECT
3.0 GPM OUT OF EACH REJECT FLOW METER FOR A TOTAL OF 6.0 GPM
RO MOTOR
5 HP FLINT & WALLING BOOSTER PUMP
RO MOTOR AMPS
12.4 / 6.2 AMPS
RO MOTOR VOLTAGE
208-460 VOLTS, 3PH
DIMENSIONS (ON WALL)
36" WIDTH X 94" TALL X 24" DEEP
NET WEIGHT
1000 LBS
DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO) NOTE: DELIVERY PUMP COMES STANDARD AS SINGLE PHASE UNLESS YOU REQUEST 3 PHASE. |
| |
| Spot Free Rinse Systems |
The addition of a PurClean Spot-Free Rinse system at a Self Service wash location will enhance the wash experience for the consumer by providing added value while generating an additional profit center for the Operator. The pure, mineral-free water produced by the PurClean system can also be used to provide the perfect chemistry for chemical delivery and eliminate the use and ongoing expense of a water softener.
Contact us about your spot free rinse system needs! |
| |
| PC 1000 Wall Mount/Self-Service |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
AUTO BACK FLUSHING CARBON HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME (BLUE OR WHITE)
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
OPTIONAL STAND MOUNT |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 0.7 GPM
REJECT
0.9 GPM
RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 HP MOTOR)
RO MOTOR AMPS
9
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 36" TALL X 12" DEEP
NET WEIGHT
350 LBS
DELIVERY PUMP
FLINT & WALLING 1HP DELIVERY PUMP 13 GPM MAX AT 150 PSI MAX AND GPM VARIES DEPENDING ON THE NUMBER OF SELF SERVE BAYS (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| PC 2000 Wall Mount/Self-Service |
| |
|
WATER STABILIZER (REPLACES WATER SOFTENER)
INLET AND PRESSURE GAUGES
AUTO BACK FLUSHING CARBON HEAD
MULTI-STAGE PRESSURE PUMP
LOW PRESSURE SHUT OFF
AUTOMATIC MEMBRANE FLUSH
PRODUCTION AND REJECT METERS
ON BOARD TDS METER
TWO STEP POWDER COATED FRAME (BLUE OR WHITE)
ALL SYSTEMS ARE ETL LISTED
REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)
THIN FILM MEMBRANES
OPTIONAL STAND MOUNT |
WATER REQUIREMENTS
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN
ELECTRIC REQUIREMENTS
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.
RO OUTPUT
PRODUCTION - 1.4 GPM
REJECT
1.6 GPM
RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 HP MOTOR)
RO MOTOR AMPS
9
RO MOTOR VOLTAGE
208-230 VOLTS
DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP
NET WEIGHT
350 LBS
DELIVERY PUMP
FLINT & WALLING 1HP DELIVERY PUMP 13 GPM MAX AT 150 PSI MAX AND GPM VARIES DEPENDING ON THE NUMBER OF SELF SERVE BAYS (CALL NEW WAVE INDUSTRIES FOR MORE INFO) |
| |
| The PurClean Spot-Free Glass Rinse System is a great housekeeping tool! |
Many wash sites have designed huge glass windows into the buildings of their washes to allow the consumer to view their vehicle going through the wash process; some of the newer carwashes are housed in attractive glass buildings to provide additional exposure and further promote the wash site. The addition of the optional PurClean Spot-Free Glass Rinse feature provides the Operator with an efficient, cost-effective system that is programmed to spray spot-free water through a uniquely designed manifold onto the glass to eliminate chemical residual, hard water and dirt build-up.
Contact us about your spot free rinse system needs! |
| |
| PC WINDOW RINSE SYSTEM |
- PUR-CLEAN WATER STABILIZER ELIMINATING THE NEED FOR A WATER SOFTENER
- HIN FILM MEMBRANES
- INLET AND PUMP PRESSURE GAUGES
- CARBON TANK WITH AUTO-BACKFLUSHING
- MULTI-STAGE PRESSURE PUMP
- LOW-PRESSURE SHUT-OFF
- SIMPLE RETROFIT FOR EXISTING WASHES
- PRE-BUILT MANIFOLD FOR EASY HANDLING
- SCHEDULE 80 PVC
- CHECK VALUES FOR INSTANT ACTIVATION AND MINIMAL WATER USE
- MULTIPLE TIMER OPTIONS INCLUDING CAR COUNT
- CUSTOM PUMP OPTIONS AVAILABLE
- ALL SYSTEMS ARE ETL LISTED
|
